Incra have reinvented the protractor by putting extra long guide slots at every 45°, 30°, 22.5°, 5°, 1° and 0.5° interval to plot any angle with ease and absolute accuracy.
If you take a few seconds to remove the T-bar you will also have an excellent 150mm rule with micro-fine marking holes at every 1mm.
INCRA's Router Table Stand is available in 2 sizes. The RTSTAND 36 is perfect for any standard router table top including our ProRouterTable Types 'A' & 'B' (600 x 800 ). Whilst the RTSTAND 43 is ideal for the ProRouterTable Type'C'
Assembly is simple, all you have to do is add some 12mm panels, either MDF, Ply or other suitable rigid material. Then the cabinet can be customised to incorporate dust collection, storage and other features you require.
This is our 10" Decimal Inches and Millimetres Marking Rule. The perfect combination of traditional Imperial and modern Metric measuring. This rule offers marking holes and slots at every 1/20th of an inch and every 1/2 millimetre.
This amazing accuracy combined with Incra's famous ease of use, makes this combination rule a world wide success.
The Precision Marking Rule boasts micro-fine marking holes and slots at every scale position to instantly locate a sharp pencil point or scribe exactly where you want it.
You can effortlessly place your mark precisely on target with zero uncertainty and no eye strain. Available in 150mm or 300mm.
Available also in 300mm length, our Metric Marking Rules are precisely what's needed for international accuracy. These rules offer marking holes at every 1/4 millimetre!
This is unmatched in the industry of marking rules.
The Professional version of our patented T-Rules is shown here in the 6 inch/150mm version. This is the most versatile and precise rule we offer. These Professional T-Rules are also available in 12 inch/300mm lengths and both lengths offer Incra's patented marking holes at every 1/16th, 32nd, 64th &1/100th inch.
But they are also bilingual because they have marking holes at every .5mm as well!
The end features 3 vertical inches of marking holes at every 32nd. You will never be without the correct measurement with these beauties.
The Professional version of our patented T-Rules is shown here in the 6 inch/150mm version, these Professional T-Rules are also available in 12 inch/300mm lengths and both lengths offer Incra's patented marking holes at every 1/16th, 32nd, 64th &1/100th inch. But they are also bilingual because they have marking holes at every .5mm as well! The end features 3 vertical inches of marking holes at every 32nd.
These rules make short work of translating plans and drawings from US magazines.
The INCRA Track System is the optimum solution to any cutting operation that requires accuracy, repeatability, multiple stop positions, or just plain ease of use. It will dramatically increase the precision and performance of your Mitre Gauge, Drill Press, Mitre Saw, Radial Arm Saw , and an unlimited variety of workshop-made jigs and fixtures.
The key is INCRA's patented sawtooth racks which position your work instantly and automatically in EXACT 1.0mm steps with true machine shop precision without measuring . It's also micro adjustable to fine-tune your position anywhere between fixed steps.
Supplied in 915mm lengths complete with racks ready for your choice of stops.
INCRA T-Rules are easy to use, versatile, and precise. Exact measurements are accomplished with scale positions at every full, 1/4, 1/2 and 3/4mm
The built-in precision this rule offers shows up in your finished work. With the adjustable fence track the T-Rule can even measure vertical dimensions.
Move over Combination Square, you've been replaced!!
Our Metric T-Rule is also available in a 300mm length. These rules offer Incra's patented marking holes at every full, 1/4, 1/2 and 3/4mm from 0 to 300mm. They also offer 0 to 50mm height marking slots on the end in millimetres.
Use as a precision T-Square to draw perpendicular lines. The T-bar is easily adjusted for making fast vertical measurements.
Support for the Incra TS systems is important, particularly when the 52" version with 92" rails are used, adding these matching legs ensures a rock solid set-up that's easily adjusted to ensure perfect alignment.
Optional Wheel Kit is available.
Genuine US made gold anodised precision Scale Track by 
