The large easy to read display reads in inches with fractions or millimetres. The fractions are displayed using “Precise Fraction Technology” which gives you 4 times the accuracy of other fraction readouts. The decimal inches are displayed in .001” increments and the millimetres in .05mm increments.
These calipers incorporate precision measuring features found in top of the line measuring tools used in metal working. The precision ground measuring faces allow for outside, inside, depth and step measurements.
The Wixey Fraction Calipers with Fractions incorporate precision measuring features found in top of the line measuring tools used in metal working. The precision ground measuring faces allow for outside, inside, depth and step measurements.
outside
inside
depth
steps
Displays Inches with Fractions or Millimetres
Inches with Fractions
Millimetres
Wixey digital calipers display both inches with fractions or millimetres. This allows you to work in either units or convert back and forth between the two.
Easy to Use
Calibrating
Pressing the “ON” button with the jaws closed calibrates the calipers to 0.000.
Inch & Millimetre
“In/mm” button toggles between displaying inch with fraction measurements or millimetres.
Zero
Pressing the “zero” button resets the calipers to zero at any position.
Auto Off
The auto off completely shuts down the calipers so there is no battery drain when off.
Take the guesswork out of setting up those critical bevel cuts on your table saw, jointer, band saw or drill press table. The compact WR300 offers +/- 0.1 degree accuracy and a range of +/- 180 degrees with the convenience of a digital display. Strong magnets hold the unit to any steel or cast iron surface. Just set the unit on a flat reference surface, press the ZERO button to calibrate the display then attach it to the saw blade, fence, etc. and precisely adjust to the desired angle.
No more wondering how thick your stock will be. Measuring stock up to 6" thick, the WR510 displays the thickness of the wood coming out of the planer to +/- 0.0025" accuracy. The large display reads in millimetres or in inches with fractions and you can make absolute and incremental measurements. Constant memory retains calibration even when turned OFF. Simple mounting brackets allow you to mount on many planers without drilling any holes. The Wixey Digital Planer Gauge is equally at home on a small 'portable' style thicknessers as it is on large planer / moulders picture below.
Spare battery included.
Additional mounting post required for larger moving table type planers.
Planer Digital Readout Specifications
Measuring Length:
6 in. (155mm)
Resolution:
Decimal
= .005 in.
Fraction
= 1/32 in.
Metric
= .01 mm
Accuracy:
Decimal
= +/- .0025 in.
Fraction
= +/- 1/500 in.
Metric
= +/- .05 mm
Battery:
6 months life; type SR44
Functions:
- Constant memory retains calibration even when OFF - Incremental measuring mode - Absolute measuring mode - Millimetre, Inch and Fraction readout
The Wixey Saw Fence Model WR700 fits most high end fence systems and measures up to 60 inches, 1500mm long. Measurements are in Metric, Imperial (fractions) and Imperial (decimal)
It easily mounts to Beisemeyer, Powermatic, Jet, HTC and other T-Square fences as well as Delta Unifence; and Dewalt, Vega and other round rail fences.
The innovative readout magnetic attachment system allows you to remove and replace your rip fence as quickly as ever without losing calibration.
For your convenience, the readout can be used on the right or left hand side of your fence.
Saw Fence Digital Readout Specifications
Measuring Length:
60 in. (1500 mm)
Resolution:
Decimal
= .005 in.
Fraction
= 1/32 in.
Metric
= .1 mm
Accuracy:
Decimal
= +/- .002 in. per foot
Fraction
= +/- 1/500 in. per foot
Metric
= +/- .13 mm
Battery:
6 months life; type CR 2032
Functions:
- Constant memory retains calibration even when OFF - Incremental measuring mode - Absolute measuring mode - Millimetre, Inch and Fraction readout - Auto shut off
Set blade heights, router bit depth of cut, and fence offset dimensions with one great accessory.
Using the incredible accuracy of the Wixey digital read-out system, this unit measures in Millimetres to 1/20th of a millimetre and Inches in both, decimals to 1/1000th of an inch and fractions of inches. All with a simple touch of a button. Strong and stable with a magnetic base insert to make single handed use a breeze.
This is a great addition to the Wixey stable of innovative digital accessories for the discerning woodworker.
The unique Phenolic Plate is 235mm x 299mm x 10mm thick with three TwistLOCK Rings with 67mm, 25mm and a stepped ring to accept guide bushings. Plates are available pre-drilled for the Triton Router or they can be easily drilled with common twist drills by user to fit your specific router.All plates include threaded solid starting pin, spanner wrench and (3) rings
All our Router Plates share the same 'footprint', that is a router table set up for a Phenolic Plate can be simply upgraded to any other plate or lift in our range. This plate has the added feature of being pre-machined to suit the Router Raizer TRA001 kit.
Why Phenolic?? Plastics come in two broad classifications, Thermoplastics that can be re-melted for recycling (Acrylics, ABS's etc) and, Thermosetting that have a unique molecular structure that prevents any form of re-melting or sagging. Phenolic (Thermosetting plastic) a has been used for decades in the manufacture of transformers and other electrical components, along with many other high stress applications.
Click on image above for more details.
To download our Phenolic Plate Mounting Tips document in PDF format, Mounting Instructions
Includes Protective Case
