Take the worry out of finding the centre point of your router and drill press applications!
Use our Universal Brass Centring Pins to centre or square your router over your work piece or check for “run-out” or wobble. Pin is double-ended for 1/4” and 1/2” routers.
Note: Pin is a positioning device only. It is not to be run in machinery
Using Template Guides with your router can open a whole new horizon of accuracy and stunning results, unfortunately, most routers aren't set up to accept the ‘standard’ brass guides, Woodpeckers have come to the rescue, with a rugged Phenolic, pre-drilled to suit 20 or so routers, and with a precision machined stepped recess to accept brass template guides, available separately.
Supplied with fixing screws to suit most common routers.
Turn Your Router Into a Precision Duplicating Machine
Unlike common template guides that come with barrel lengths up to 1" long for specialty jig work, these are designed for standard template routing. Use for pattern and clean-out work, for dovetail, box joint, or mortise and tenon joinery, as well as with lock face and butt hinge fixtures. All guides feature a 5.1mm (.201") short barrel length design to be used with any template as thin as 6mm (1/4") thick. Fits any router or router plate that accepts a standard 1-3/16" outside diameter threaded template guide bushing. For all other routers order universal template guide mounting plates. Set includes 2 lock nuts and 8 guides (Internal Dia. x Outside Dia.): 1/4" x 5/16", 9/32" x 3/8", 11/32" x 7/16", 13/32" x 1/2", 17/32" x 5/8", 21/32" x 3/4", 5/8" x 51/64", 7/8" x 1", plus 2 locknuts. Case included.
