Home | About Us | Testimonials | Search | Braggers | FAQ's | Links | View Cart

Current Category Router Lifts & Plates > Phenolic Plates

Phenolic TLR Router Plate To suit Triton Routers
	QTY:
Our new TLR Phenolic Router Plate combines the convenience of TwistLOCK rings with the quality of a Phenolic router plate. TwistLOCK Rings can be changed in just seconds with out any need for adjustment. Each TwistLOCK Ring is carefully machined to match flush with the plate to within a few thousandths of an inch. Each router plate and ring is engraved with clear markings for your router type and ring installation direction. Unlike polycarbonate or acrylic plates, Woodpecker Phenolic router plates remain true under a wide range of operating temperatures and won't sag even in the hottest shops with the heaviest router. Each router plate is machined in a CNC milling machine to exacting tolerances to give you a perfect fit with Woodpecker router tables and other router tables with a 9¼ x 11¾ opening. Eight threaded set screws are accessible from above to simplify levelling. These router plates also feature our exclusive adjustable brass plungers to ensure a perfect fit in the router table opening. Each 3/8" thick router plate includes three TwistLOCK Rings with 2-5/8", 1" and a 1-3/16" guide bushing openings, a metal starting pin, spanner wrench and if pre-drilled, the special screws needed to mount your router. Woodpecker TLR Phenolic Router Plates are available pre-machined for the Triton range of routers and are supplied with mounting screws.   A blank version is available which you can drill to match your specific router model.          Don't waste your money on cheaper Acrylic & Polycarbonate plates, go straight to the proven performer... Woodpeckers TLR Phenolic Plate.

Phenolic TLR Router Plate Blank (Other Routers)
	QTY:
As per Triton version but blank ready to be drilled to suit your router.

Router Table Free-Hand Guard
	QTY:
If you're doing free hand routing, you know how tricky it can be to start the cut. Router bits tend to spin the board and gouge the wrong edge when you start the cut. This often results in damage to your carefully shaped furniture parts. Starting Pins can help you gain control but don't offer dust collection or protection from flying chips. The new Woodpecker Free-Hand Guard does all these things in a well built, high quality form. The Free-Hand Guard serves three purposes; first it provides a fulcrum to rest your board against, second a dust port for a hose hook up and third a shield to keep chips from flying up into your face. (The shield is not a substitute for safety goggles.)   Our new Free-Hand Guard attaches directly to any Woodpecker Router Plate or Lift.  Two knobs make it simple and fast to install or remove. It's also adaptable to other brand plates by simply drilling two holes and using the included alternate attachment screws. (Instructions included.) The Free-Hand Guard is made up of a laminated birch base, a Phenolic top plate, an acrylic shield with a combination 2-1/2” – 2-1/4” dust port. Accommodates materials up to 1-1/2” (38mm) in thickness.   Made in the USA

TLR Phenolic Insert 2" opening
	QTY:
As for the solid ring this 50mm dia version is a valuable addition to your router table.